Category: 24434-84-2

Downstream synthetic route of 24434-84-2

As the paragraph descriping shows that 24434-84-2 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.24434-84-2,Benzo[b]thiophene-3-carbonitrile,as a common compound, the synthetic route is as follows.

General procedure: Benzo[b]thiophene-3-carbaldehyde (40 mg, 0.25 mmol, 1.0 equiv),Pd(TFA) 2 (4.2 mg, 5 mol%), (4-FC 6 H 4 ) 3 P (9.5 mg, 12 mol%), DPEphos (8mg, 6 mol%), and Cs 2 CO 3 (122 mg, 0.375 mmol) were placed in atransparent Schlenk tube equipped with a stirring bar. The tube wasevacuated and filled with argon for three times. Degassed DMF (2.5mL) and tert-butyl bromide (51 mg, 0.375 mmol, 1.5 equiv) were add-ed via a gastight syringe. The reaction mixture was stirred under theirradiation of 36 W blue LEDs (distance app. 2.0-3.0 cm from thebulb) at r.t. for 24 h. The mixture was quenched with brine and ex-tracted with EtOAc (3 × 10 mL). The organic layers were combinedand concentrated under reduced pressure. The product was purifiedby flash column chromatography on silica gel using PE or a mixture of PEand EtOAc (10:1 v/v) as eluent; yield: 50.1 mg (92%); pale yellow liquid., 24434-84-2

As the paragraph descriping shows that 24434-84-2 is playing an increasingly important role.

Reference：
Article; Wang, Guang-Zu; Shang, Rui; Fu, Yao; Synthesis; vol. 50; 15; (2018); p. 2908 – 2914;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Downstream synthetic route of 24434-84-2

As the paragraph descriping shows that 24434-84-2 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.24434-84-2,Benzo[b]thiophene-3-carbonitrile,as a common compound, the synthetic route is as follows.

General procedure:To a stirred solution of benzo[b]thiophene-3-carbonitrile (1.23 g, 7.7 mmol) in appropriate anhydrous solvent (15 mL) were slowly added 3 equiv of bromine (1.2 mL, 23.1 mmol). The resulting mixture was stirred at room temperature overnight. If the reaction was not complete (as observed by TLC or 1H NMR), additional bromine was added (0.5 equiv per 0.5 equiv) until total consumption of the starting material. Then the mixture was partitioned between CH2Cl2 (120 mL) and 10% aqueous NaHCO3 solution (120 mL). To this biphasic solution was added dropwise, under vigorous stirring, saturated aqueous Na2S2O3 solution until discoloration of the organic medium. The organic layer was separated, and the aqueous layer was extracted twice with CH2Cl2 (2 ¡Á 50 mL). The combined extract was dried (MgSO4), filtered and concentrated under vacuum. The resulting residue was purified by flash chromatography (SiO2, cyclohexane/EtOAc 93:7) to afford the pure desired product.To a stirred solution of benzo[b]thiophene-3-carbonitrile (1.23 g, 7.7 mmol) in appropriate anhydrous solvent (15 mL) were slowly added 3 equiv of bromine (1.2 mL, 23.1 mmol). The resulting mixture was stirred at room temperature overnight. If the reaction was not complete (as observed by TLC or 1H NMR), additional bromine was added (0.5 equiv per 0.5 equiv) until total consumption of the starting material. Then the mixture was partitioned between CH2Cl2 (120 mL) and 10% aqueous NaHCO3 solution (120 mL). To this biphasic solution was added dropwise, under vigorous stirring, saturated aqueous Na2S2O3 solution until discoloration of the organic medium. The organic layer was separated, and the aqueous layer was extracted twice with CH2Cl2 (2 ¡Á 50 mL). The combined extract was dried (MgSO4), filtered and concentrated under vacuum. The resulting residue was purified by flash chromatography (SiO2, cyclohexane/EtOAc 93:7) to afford the pure desired product., 24434-84-2

As the paragraph descriping shows that 24434-84-2 is playing an increasingly important role.

Reference£º
Article; Liger, Francois; Pellet-Rostaing, Stephane; Popowycz, Florence; Lemaire, Marc; Tetrahedron Letters; vol. 52; 29; (2011); p. 3736 – 3739;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Simple exploration of 24434-84-2

The synthetic route of 24434-84-2 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.24434-84-2,Benzo[b]thiophene-3-carbonitrile,as a common compound, the synthetic route is as follows.

General procedure:To a stirred solution of benzo[b]thiophene-3-carbonitrile (1.23 g, 7.7 mmol) in appropriate anhydrous solvent (15 mL) were slowly added 3 equiv of bromine (1.2 mL, 23.1 mmol). The resulting mixture was stirred at room temperature overnight. If the reaction was not complete (as observed by TLC or 1H NMR), additional bromine was added (0.5 equiv per 0.5 equiv) until total consumption of the starting material. Then the mixture was partitioned between CH2Cl2 (120 mL) and 10% aqueous NaHCO3 solution (120 mL). To this biphasic solution was added dropwise, under vigorous stirring, saturated aqueous Na2S2O3 solution until discoloration of the organic medium. The organic layer was separated, and the aqueous layer was extracted twice with CH2Cl2 (2 ¡Á 50 mL). The combined extract was dried (MgSO4), filtered and concentrated under vacuum. The resulting residue was purified by flash chromatography (SiO2, cyclohexane/EtOAc 93:7) to afford the pure desired product.To a stirred solution of benzo[b]thiophene-3-carbonitrile (1.23 g, 7.7 mmol) in appropriate anhydrous solvent (15 mL) were slowly added 3 equiv of bromine (1.2 mL, 23.1 mmol). The resulting mixture was stirred at room temperature overnight. If the reaction was not complete (as observed by TLC or 1H NMR), additional bromine was added (0.5 equiv per 0.5 equiv) until total consumption of the starting material. Then the mixture was partitioned between CH2Cl2 (120 mL) and 10% aqueous NaHCO3 solution (120 mL). To this biphasic solution was added dropwise, under vigorous stirring, saturated aqueous Na2S2O3 solution until discoloration of the organic medium. The organic layer was separated, and the aqueous layer was extracted twice with CH2Cl2 (2 ¡Á 50 mL). The combined extract was dried (MgSO4), filtered and concentrated under vacuum. The resulting residue was purified by flash chromatography (SiO2, cyclohexane/EtOAc 93:7) to afford the pure desired product., 24434-84-2

The synthetic route of 24434-84-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Liger, Francois; Pellet-Rostaing, Stephane; Popowycz, Florence; Lemaire, Marc; Tetrahedron Letters; vol. 52; 29; (2011); p. 3736 – 3739;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Brief introduction of 24434-84-2

24434-84-2, The synthetic route of 24434-84-2 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.24434-84-2,Benzo[b]thiophene-3-carbonitrile,as a common compound, the synthetic route is as follows.

(a) Methyl(benzo[b]thiophen-3-yl)imidate hydrochloride Benzo[b]thiophen-3-carbonitrile (700 mg) was dissolved in dry methanol (25 ml), and the resulting solution cooled to 10 C. under a dry nitrogen atmosphere. Dry hydrogen chloride gas was passed through the chilled solution for 40 minutes, and the resulting red solution allowed to stand at room temperature overnight. Removal of solvent under reduced pressure and recrystallisation from methanol/ether afforded the title compound as white needles (810 mg), m.p. 197-200 C. deltaH (360 MHz, DMSO-d6) 4.35 (3H, s, OCH3), 7.53 (2H, m, H-5,6), 8.19 (2H, m, H-4, 7) 8.41 (1H, s, H-2); m/z 191(M+, 70%) 160(100), 133(30), 89(40).

24434-84-2, The synthetic route of 24434-84-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Merck Sharp & Dohme Limited; US4940703; (1990); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Some tips on 24434-84-2

The synthetic route of 24434-84-2 has been constantly updated, and we look forward to future research findings.

24434-84-2, Benzo[b]thiophene-3-carbonitrile is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In a two-necked flask equipped with a reflux condenser were placed RhH(PPh3)4 (4 mol%, 11.5 mg), 1,2-bis(diphenylphosphino)ethane (8 mol%, 8.0 mg), 1,3-benzothiazole 5 (0.25 mmol, 27.3 mL), and (alpha-phenylthio)isobutyrophenone 6 (0.25 mmol, 64.0 mg) in chlorobenzene (0.25 mL) under an argon atmosphere, and the solution was heated at reflux for 3 h. The mixture was purified by flash column chromatography on silica gel giving 7 (55.8 mg, 92%) and isobutyrophenone 8 (34.3 mg, 93%) with the recovery of 5 (3.5 mg, 10%) and 6 (0.8 mg, 1%)., 24434-84-2

The synthetic route of 24434-84-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Arisawa, Mieko; Toriyama, Fumihiko; Yamaguchi, Masahiko; Tetrahedron Letters; vol. 52; 18; (2011); p. 2344 – 2347;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Analyzing the synthesis route of 24434-84-2

The synthetic route of 24434-84-2 has been constantly updated, and we look forward to future research findings.

24434-84-2, Benzo[b]thiophene-3-carbonitrile is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure:To a stirred solution of benzo[b]thiophene-3-carbonitrile (1.23 g, 7.7 mmol) in appropriate anhydrous solvent (15 mL) were slowly added 3 equiv of bromine (1.2 mL, 23.1 mmol). The resulting mixture was stirred at room temperature overnight. If the reaction was not complete (as observed by TLC or 1H NMR), additional bromine was added (0.5 equiv per 0.5 equiv) until total consumption of the starting material. Then the mixture was partitioned between CH2Cl2 (120 mL) and 10% aqueous NaHCO3 solution (120 mL). To this biphasic solution was added dropwise, under vigorous stirring, saturated aqueous Na2S2O3 solution until discoloration of the organic medium. The organic layer was separated, and the aqueous layer was extracted twice with CH2Cl2 (2 ¡Á 50 mL). The combined extract was dried (MgSO4), filtered and concentrated under vacuum. The resulting residue was purified by flash chromatography (SiO2, cyclohexane/EtOAc 93:7) to afford the pure desired product.To a stirred solution of benzo[b]thiophene-3-carbonitrile (1.23 g, 7.7 mmol) in appropriate anhydrous solvent (15 mL) were slowly added 3 equiv of bromine (1.2 mL, 23.1 mmol). The resulting mixture was stirred at room temperature overnight. If the reaction was not complete (as observed by TLC or 1H NMR), additional bromine was added (0.5 equiv per 0.5 equiv) until total consumption of the starting material. Then the mixture was partitioned between CH2Cl2 (120 mL) and 10% aqueous NaHCO3 solution (120 mL). To this biphasic solution was added dropwise, under vigorous stirring, saturated aqueous Na2S2O3 solution until discoloration of the organic medium. The organic layer was separated, and the aqueous layer was extracted twice with CH2Cl2 (2 ¡Á 50 mL). The combined extract was dried (MgSO4), filtered and concentrated under vacuum. The resulting residue was purified by flash chromatography (SiO2, cyclohexane/EtOAc 93:7) to afford the pure desired product., 24434-84-2

The synthetic route of 24434-84-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Liger, Francois; Pellet-Rostaing, Stephane; Popowycz, Florence; Lemaire, Marc; Tetrahedron Letters; vol. 52; 29; (2011); p. 3736 – 3739;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Analyzing the synthesis route of 24434-84-2

The synthetic route of 24434-84-2 has been constantly updated, and we look forward to future research findings.

24434-84-2, Benzo[b]thiophene-3-carbonitrile is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In an oven-dried Schlenk tube equipped with a magnetic stir bar, the photocatalyst [Ir(dF-CH3-ppy)2(dtbpy)]PF6 (PC-1) (5.1 mg, 0.005 mmol, 1.0 mol%) was dissolved in MeCN (0.4 mL) andwater (0.1 mL) under an atmosphere of dry argon. In the absence of light, the respectivebenzothiophene (0.50 mmol, 1.0 equiv) and alkene (1.50 mmol, 3.0 equiv) were added in anargon stream. The reaction mixture was degassed by three freeze-pump-thaw cycles and thetube was finally backfilled with argon. The reaction was stirred under irradiation with visiblelight from two 30 W Kessil LED (lambdamax = 455 nm, see chapter 1.2 for emission spectrum). Afterthe indicated time, the solvent was removed in vacuo and the residue was purified by flashcolumn chromatography on silica gel to afford products 3a-3o as (mostly) inseparablemixtures of diastereomers.

The synthetic route of 24434-84-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Strieth-Kalthoff; Henkel, Christian; Teders, Michael; Kahnt, Axel; Knolle, Wolfgang; Gomez-Suarez, Adrian; Dirian, Konstantin; Alex, Wiebke; Bergander; Daniliuc, Constantin G.; Abel; Guldi, Dirk M.; Glorius; Chem; vol. 5; 8; (2019); p. 2183 – 2194;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem