Analyzing the synthesis route of 34761-09-6

34761-09-6, The synthetic route of 34761-09-6 has been constantly updated, and we look forward to future research findings.

34761-09-6, Ethyl 3-aminobenzo[b]thiophene-2-carboxylate is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of 3-aminobenzo[b]thiophene-2-carboxylate 7 (0.9 mmol) in glacial acetic acid (5ml) water solution of NaNO2( 1.8 mmol) was added dropwise. The mixture was left under stirring for 2h at rt. Then ammonium acetate (32.4 mmol) and an appropriate primary amine 9a-e (10 mmol) were added. The precipitate was filtered off, and the crude was recrystallized from ethanol.

34761-09-6, The synthetic route of 34761-09-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Lauria, Antonino; Alfio, Alessia; Bonsignore, Riccardo; Gentile, Carla; Martorana, Annamaria; Gennaro, Giuseppe; Barone, Giampaolo; Terenzi, Alessio; Almerico, Anna Maria; Bioorganic and Medicinal Chemistry Letters; vol. 24; 15; (2014); p. 3291 – 3297;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

New learning discoveries about 5381-20-4

5381-20-4 Thianaphthene-3-carboxaldehyde 227328, abenzothiophene compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5381-20-4,Thianaphthene-3-carboxaldehyde,as a common compound, the synthetic route is as follows.

5381-20-4, Thianaphthene-3-carboxaldehyde (5 g, 30.8 mmol) was dissolved in THF (50 mL). Sulfamide (12.22 g, 123.30 mmoles) and sulfamic acid (0.29 g, 3.08 mmoles) were added and the reaction mixture heated to 45 C. for 18 h. The reaction mixture was then cooled to room temperature and filtered through a sintered glass funnel. The resulting solution was treated with lithium borohydride (2.0 M in THF, 5 mL, 10 mmol) via addition funnel. After addition (5 minutes) the reaction mixture was stirred for 1 hour. 1 N HCl (20 mL, 20 mmol) was added and the reaction mixture concentrated to remove THF. The resulting suspension was treated with water (100 mL) and vigorously stirred. The resulting solid was filtered and dried to yield the title compound as a light pink solid. 1H NMR (DMSO-d6): delta 7.98 (1H, dd, J=6.5, 2.3 Hz), 7.92 (1H, dd, J=6.6, 2.4 Hz), 7.62 (1H, s), 7.36-7.45 (2H, m), 7.08 (1H, t, J=6.3 Hz), 6.72 (2H, s), 4.31 (2H, d, J=6.3 Hz).

5381-20-4 Thianaphthene-3-carboxaldehyde 227328, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Patent; Abdel-Magid, Ahmed F.; Mehrman, Steven J.; US2006/270856; (2006); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

New learning discoveries about 360576-01-8

360576-01-8 Methyl 6-bromobenzo[b]thiophene-2-carboxylate 22474078, abenzothiophene compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.360576-01-8,Methyl 6-bromobenzo[b]thiophene-2-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: The solution of compound 2a-2n (1.1 mmol) in water (10 mL)was stirred and then potassium hydroxide pellets (5.4 mmol) wereadded, which was refluxed for 3 h. The aqueous layer was thenacidified to pH 1 with 1M hydrochloric acid solution. The aqueouslayer was extracted with dichloromethane (3 x 15 mL). The combinedorganic layers were dried with sodium sulfate, filtered, andthe solvents were removed under reduced pressure to afford thetitle compound 3a-3n [31,34]., 360576-01-8

360576-01-8 Methyl 6-bromobenzo[b]thiophene-2-carboxylate 22474078, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Article; Cai, Guiping; Yu, Wenying; Song, Dongmei; Zhang, Wenda; Guo, Jianpeng; Zhu, Jiawen; Ren, Yuhao; Kong, Lingyi; European Journal of Medicinal Chemistry; vol. 174; (2019); p. 236 – 251;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

New learning discoveries about 4923-87-9

4923-87-9 5-Bromobenzothiophene 2776578, abenzothiophene compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4923-87-9,5-Bromobenzothiophene,as a common compound, the synthetic route is as follows.

Add 5-bromobenzo[b]thiophene (0601-38) (2.13 g, 10 mmol, 1.0 eq.) to the reaction flask.Zinc cyanide (2.34 g, 20 mmol, 2.0 eq.),Tetrakistriphenylphosphine palladium (1.16 g, 1 mmol, 0.1 eq.) and dimethylformamide (16 ml),The reaction was stirred at reflux overnight.The reaction mixture was diluted with EtOAc (EtOAc) (EtOAc)The residue was purified by silica gel column chromatography (eluent: petroleum ether: ethyl acetate = 10:1)The white solid product benzo[b]thiophene-5-carbonitrile (1.57 g, yield: 99%) was obtained., 4923-87-9

4923-87-9 5-Bromobenzothiophene 2776578, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Patent; Guangzhou Bi Beite Pharmaceutical Co., Ltd.; Cai Xiong; Qian Changgeng; Ye Chunqiang; He Qijie; (86 pag.)CN108658908; (2018); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Brief introduction of 5381-20-4

5381-20-4 Thianaphthene-3-carboxaldehyde 227328, abenzothiophene compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5381-20-4,Thianaphthene-3-carboxaldehyde,as a common compound, the synthetic route is as follows.,5381-20-4

General procedure: A solution of arylcarbaldehyde (10.4 mmol) and (ethoxycarbonylmethylene)triphenylphosphorane (14.6 mmol) in THF (20 mL) was heated at 80 C for 12 h. After cooling to an ambient temperature, the reaction mixture was quenched with water, and then was extracted with EtOAc. The organic layer was washed with brine, dried over Na2SO4, and evaporated in vacuo. The residue was purified by column chromatography (silica gel, 30 g) using EtOAc-hexane (3:97, v/v) as an eluent to give the (E)-acrylate 9.

5381-20-4 Thianaphthene-3-carboxaldehyde 227328, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Article; Nishiyama, Takashi; Hatae, Noriyuki; Hayashi, Kaori; Obata, Manami; Taninaka, Kimiko; Yamane, Masahiro; Oda, Shota; Abe, Takumi; Ishikura, Minoru; Hibino, Satoshi; Choshi, Tominari; Heterocycles; vol. 95; 1; (2017); p. 251 – 267;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Brief introduction of 1423-61-6

1423-61-6, 1423-61-6 7-Bromobenzo[b]thiophene 12045538, abenzothiophene compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1423-61-6,7-Bromobenzo[b]thiophene,as a common compound, the synthetic route is as follows.

To a stirring solution of diisopropylamine (0.594 g, 5.87 mmol) in THF (3 mL) at -70 C under nitrogen was added n-butyllithium, 2.5 M solution in hexanes (2.065 mL, 5.16 mmol) at a rate not to exceed -60 C. After 15 min a solution of 7-bromo-l-benzothiophene (Maybridge Chemical Co., Ltd., 1.0 g, 4.69 mmol) in THF (4 mL) was added dropwise at a rate that did not exceed an internal temperature of -65 C. This solution was stirred for 1 h at -75 C. To this was added a solution of N-((lE)-(2- chlorophenyl)methylidene)cyclopropanesulfonamide (1.144 g, 4.69 mmol, Intermediate AAIO) in THF (4 mL) at a rate that did not exceed an internal temperature of -65 C. After 15 min, the reaction was warmed to -30 C then quenched with saturated NH4C1 (20 mL). To the biphasic solution was added EtO Ac (20 mL). The isolated organic was then dried over MgS04, filtered, concentrated under reduced pressure, then purified by silica gel chromatography (80 g) eluting products with 0 to 30% gradient of EtO Ac/Hex to afford N-((7- bromo-l-benzothiophen-2-yl)(2-chlorophenyl)methyl)cyclopropanesulfonamide (0.71 g, 1.554 mmol, 33.1 % yield) as colorless oil (mixture of 2 enantiomers).

1423-61-6, 1423-61-6 7-Bromobenzo[b]thiophene 12045538, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Patent; AMGEN INC.; ASHTON, Kate; BARTBERGER, Michael D.; BOURBEAU, Matthew Paul; CROGHAN, Michael D.; FOTSCH, Christopher H.; HUNGATE, Randall W.; KONG, Ke; NISHIMURA, Nobuko; NORMAN, Mark H.; PENNINGTON, Lewis D.; REICHELT, Andreas; SIEGMUND, Aaron C.; TADESSE, Seifu; ST. JEAN, David Jr; YANG, Kevin C.; YAO, Guomin; WO2013/173382; (2013); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Some tips on 1423-61-6

1423-61-6, As the paragraph descriping shows that 1423-61-6 is playing an increasingly important role.

1423-61-6, 7-Bromobenzo[b]thiophene is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In some embodiments (Scheme 3), in a 50 mL round-bottom flask, 7-bromo- benzo[Z?]thiophene (0.213 g,l mmol) and Pd(PPh3)4 (0.116 g, 0.1 mmol) are suspended in THF (3 mL), then zinc reagent (6 mL, 3 mmol) is added with syringe. The reaction is stirred at 60 C for three hours, then the reaction mixture is cooled to room temperature, solvent is removed, EtOAc (30 mL) is added, and the mixture washed with 2 N NaOH solution (20 mL x 2). The organic layer is dried with Na2S04 and concentrated. The crude product is purified by ISCO silica column using 0-25% EtOAc in hexanes to yield 49 mg (20.9% yield) desired product methyl (2S)-3-(l- benzothiophen-7-yl)-2-methylpropanoate. NMR. (499 MHz, CDC13) delta 7.70 (dd, J= 7.9, 1.1 Hz, 1H), 7.43 (d,J=5.4Hz, 1H), 7.36 (d,J= 5.4 Hz, 1H), 7.31 (t,J=7.6 Hz, 1H), 7.15 (d, J= 7.2 Hz, 1H), 3.66 (s, 3H), 3.35(dd,J = 13.9, 6.8 Hz, 1H), 3.12 – 3.00 (m, 1H), 2.93 (dd,J= 14.0,8.0 Hz, 1H), 1.21 (d,J=7.0Hz, 3H).

1423-61-6, As the paragraph descriping shows that 1423-61-6 is playing an increasingly important role.

Reference£º
Patent; RIDEOUT, Darryl; LEDERMAN, Seth; DAUGHERTY, Bruce; GERSHELL, Leland, J.; (643 pag.)WO2016/105448; (2016); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Analyzing the synthesis route of 5381-20-4

As the paragraph descriping shows that 5381-20-4 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5381-20-4,Thianaphthene-3-carboxaldehyde,as a common compound, the synthetic route is as follows.

5381-20-4, General procedure: To a solution of aldehyde 1 (1 equiv.) in tetrahydrofuran (THF) was slowly added 1.0 M allyl magnesium bromide (2 equiv.) at 0 oC. Some of the aldehydes 1f-1m, 1w, and 1x were treated with the solution of zinc and allyl bromide instead of allyl magnesium bromide because allyl magnesium bromide did not work properly. The reaction mixture was warmed to room temperature and stirred for 2-12 h. Saturated NH4Cl aqueous solution was added to the mixture and it was poured into ethyl acetate and extracted with ethyl acetate 2 times. The combined organic layers were washed with brine, dried with Na2SO4, filtered, and concentrated. The residue was purified by silica gel column chromatography (Hexane/Ethyl acetate) to give compounds 2 (26-99% of yield).

As the paragraph descriping shows that 5381-20-4 is playing an increasingly important role.

Reference£º
Article; Lee, Sun-Mi; Lee, Won-Gil; Kim, Young-Chul; Ko, Hyojin; Bioorganic and Medicinal Chemistry Letters; vol. 21; 19; (2011); p. 5726 – 5729;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

Analyzing the synthesis route of 154650-81-4

154650-81-4 Benzo[b]thiophene-6-carbonitrile 21816574, abenzothiophene compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.154650-81-4,Benzo[b]thiophene-6-carbonitrile,as a common compound, the synthetic route is as follows.

A solution of l-benzothiophene-6-carbonitrile, INTERMEDIATE 13 (230 mg, 1.45 mmol) in THF (10 mL) was cooled to -78C. Freshly prepared LDA solution (3.47 mL, ca. 0.5 M in THF/hexane, 1.73 mmol) was dropwise added and the mixture was stirred for 15 min. Iodine (440 mg, 1.73 mmol) were added and the reaction was allowed to reach – 50C over a period of 1.5 h. 1 M HC1 and DCM were added, the organic phase was washed with Na2S203 solution. The organic phase was collected and the solvents removed in vacuo and the crude product was used without further purification. Yield: 394 mg (96%); yellow solid. MS(ESI+) m/z 286 [M+H]+., 154650-81-4

154650-81-4 Benzo[b]thiophene-6-carbonitrile 21816574, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Patent; KANCERA AB; HAMMER, Kristin; JOeNSSON, Mattias; KRUeGER, Lars; (230 pag.)WO2017/108282; (2017); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

 

New learning discoveries about 75894-07-4

The synthetic route of 75894-07-4 has been constantly updated, and we look forward to future research findings.

75894-07-4, 2-(Benzo[b]thiophen-2-yl)acetic acid is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 131 N-[4-[2-(3,4-Dimethoxyphenyl)ethyl]phenyl]-3-hydroxy-alpha -oxo-benzo[b]thiophene-2-acetamide (See Scheme I, Formula I, Wherein Q is I4, Wherein b is zero; y is 2; R5 is hydrogen; R6 is 4-[2-(3,4-dimethoxyphenyl)ethyl]) To a stirred solution of benzo[b]thiophene-2-acetic acid, 3-hydroxy-alpha-oxo (Fries and Bartholomaus, Annalen, 405, 391 (1914)) (44.44 g, 0.2 mole) and 4-(3,4-dimethoxyphenethyl)aniline (51.46 g, 0.2 mole) in methylene chloride (2.5 l) and tetrahydrofuran (1 l) under nitrogen at -7 C. is added a solution of dicyclohexycarbodiimide (41.7 g, 0.202 mole) in methylene chloride (200 ml) over a period of 55 minutes. The mixture is stirred at -7 to 0 C. for two hours and at room temperature overnight. The precipitate is collected by filtration and washed with methylene chloride to give a solid, consisting of the product and dicyclohexylurea. Evaporation of the mother liquor under reduced pressure below 45 C. gives a solid, which is combined with the first crop, dissolved in ~4 1 of boiling chloroform and left at room temperature overnight. Dicyclohexylurea (26 g) is removed by filtration and the filtrate is chromatographed on 1 kg of silica gel. Elution with chloroform gives 61.4 g of a solid. Recrystallization from tetrahydrofuran yields 53.2 g (57.6%) of a light-yellow crystalline solid, mp 204-205 C., 75894-07-4

The synthetic route of 75894-07-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Warner-Lambert Company; US4761424; (1988); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem