Day: September 24, 2020

89673-36-9, tert-Butyl benzo[b]thiophen-2-ylcarbamate is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

89673-36-9, A solution of compound 235 (0.250 g, 1.00 mmol) was stirred in 4 M HCl solution in 1,4-dioxane (3 mL) at room temperature for 2 hrs at which time thin layer chromatography (DCM/Hexanes) indicated the reaction was complete. The reaction mixture was cooled to room temperature and concentrated under vacuum. The residue was diluted with acetonitrile, sonicated, and concentrated to afford compound 236 as a grey solid 0.24 g (91%). HPLC-MS tR=1.5 Min(UV254 nm). Mass calculated for formula C8H7NS, M+149.21, observed LC/MS m/z 150.40 (M+H).

As the paragraph descriping shows that 89673-36-9 is playing an increasingly important role.

Reference£º
Patent; Schering Corporation; US2007/105864; (2007); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.95-15-8,Thianaphthene,as a common compound, the synthetic route is as follows.,95-15-8

EXAMPLE; (Example); First step: Synthesis of 1-benzothien-2-yl(5-bromo-2-fluorophenyl)methanol; Into a tetrahydrofuran (100 liters) solution of benzo[b]thiophene (17.4 kg ) was dropwise added a n-hexane solution (56.2 kg) of n-butyl lithium (15.08%) in an argon atmosphere at -24.2 to -13.5C, followed by stirring at -22.1 to -13.5C for 40 minutes. Into this solution was dropwise added a tetrahydrofuran (18 liters) solution of 5-bromo-2-fluorobenzaldehyde (25.5 kg) at -22.1 to -11.8C, followed by stirring at -23.5 to -16.1C for 2 hours. To the reaction mixture were added water (100 liters), toluene (130 liters) and 38% hydrochloric acid (12.3 kg), and extraction was conducted. The organic layer was washed with water (130 liters) and then subjected to distillation at normal pressure to distill off the solvent until the residue became 100 liters. Toluene (130 liters) was added to the residue and the mixture was subjected to distillation at normal pressure to distil off the solvent until the residue became 100 liters. The operation of adding toluene to the residue and subjecting the mixture to distillation under reduced pressure to distill off the solvent, was repeated twice: Then, n-heptane (310 liters) was added to the residue, followed by heating to dissolve the residue. To the solution was added, as a seed crystal, about 26 g of the 1-benzothien-2-yl(5-bromo-2-fluorophenyl)methanol produced in the same manner as that shown in the first step of Reference Example 1, followed by stirring at 1.2 to 5.0C for 13 hours. The separated-out crystals were collected by filtration, washed twice with a toluene-n-heptane (1:6) mixed solvent (26 liters), and subjected to vacuum drying to obtain, as white crystals, 1-benzothien-2-yl(5-bromo-2-fluorophenyl)methanol [35.91 kg, yield: 84.8%, purity: 99% (HPLC)]. 1H-NMR (CDCl3): delta 2.74 (1H, d), 6.35 (1H, d), 6.93 (1H, dd), 7.14 (1H, s), 7.27-7.38 (2H, m), 7.39 (1H, m), 7.68 (1H, dd), 7.74 (2H, m)

The synthetic route of 95-15-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Astellas Pharma Inc.; Kotobuki Pharmaceutical Co., Ltd.; EP2105442; (2009); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.3541-37-5,Benzo[b]thiophene-2-carboxaldehyde,as a common compound, the synthetic route is as follows.

[0054] Calixarene 6 (benzothiophene-resorcinol calix[4]arene,) was prepared by the following method. To a 250 mL round bottom flask, resorcinol (2.00 g, 18.2 mmol), benzo[b]thiophene-2-carboxaldehyde (2.95 g, 18.2 mmol), ethanol (100 mL), and HCl (concentrated, 10 mL) were added. A nitrogen inlet was equipped and the reaction was stirred at 80 C. for 16 h. The reaction began as a clear solution but slowly formed a purple precipitate. After completion of the reaction, the resulting solution was filtered through a fritted funnel and the solid collected was washed with water (50 mL) and ethanol (50 mL). The washed product was dried in vacuo at 60 C. for 16 hours (yield: 4.05 g, 88%). LC-MS m/z=1017.2 g/mol.

3541-37-5, 3541-37-5 Benzo[b]thiophene-2-carboxaldehyde 736500, abenzothiophene compound, is more and more widely used in various fields.

Reference£º
Patent; ROHM AND HAAS ELECTRONIC MATERIALS LLC; Green, D. Patrick; Jain, Vipul; Bailey, Brad C.; US2013/157195; (2013); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.34761-09-6,Ethyl 3-aminobenzo[b]thiophene-2-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: To a solution of 3-aminobenzo[b]thiophene-2-carboxylate 7 (0.9 mmol) in glacial acetic acid (5ml) water solution of NaNO2( 1.8 mmol) was added dropwise. The mixture was left under stirring for 2h at rt. Then ammonium acetate (32.4 mmol) and an appropriate primary amine 9a-e (10 mmol) were added. The precipitate was filtered off, and the crude was recrystallized from ethanol., 34761-09-6

The synthetic route of 34761-09-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Lauria, Antonino; Alfio, Alessia; Bonsignore, Riccardo; Gentile, Carla; Martorana, Annamaria; Gennaro, Giuseppe; Barone, Giampaolo; Terenzi, Alessio; Almerico, Anna Maria; Bioorganic and Medicinal Chemistry Letters; vol. 24; 15; (2014); p. 3291 – 3297;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

95-15-8,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.95-15-8,Thianaphthene,as a common compound, the synthetic route is as follows.

1) The compound of formula 2 benzothiophene (2.68 g, 20 mmol)Dissolved in refined tetrahydrofuran, stirred under argon and 195K conditions,2.4 mol / L of n-butyllithium (9.75 mL, 23 mmol) was slowly injected,Continue low temperature reaction for half an hour. Iodomethane (3 mL, 23 mmol)Injected into the reaction flask, the reaction mixture was stirred at low temperature for an hour,Naturally rose to room temperature, adding an appropriate amount of water to terminate the reaction.Liquid separation and extraction with methylene chloride. Combine the organic phases, whirl, remove the solvent and dry. The residue was chromatographed on petroleum ether, silica gel to give 2.67 g of a colorless solid,Yield: 90%.

As the paragraph descriping shows that 95-15-8 is playing an increasingly important role.

Reference£º
Patent; Jiangxi Science and Technology Normal University; Pu Shouzhi; Liu Gang; Li Gang; (14 pag.)CN106905312; (2017); A;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5381-20-4,Thianaphthene-3-carboxaldehyde,as a common compound, the synthetic route is as follows.

General procedure: Benzo[b]thiophene-3-carbaldehyde (40 mg, 0.25 mmol, 1.0 equiv),Pd(TFA) 2 (4.2 mg, 5 mol%), (4-FC 6 H 4 ) 3 P (9.5 mg, 12 mol%), DPEphos (8mg, 6 mol%), and Cs 2 CO 3 (122 mg, 0.375 mmol) were placed in atransparent Schlenk tube equipped with a stirring bar. The tube wasevacuated and filled with argon for three times. Degassed DMF (2.5mL) and tert-butyl bromide (51 mg, 0.375 mmol, 1.5 equiv) were add-ed via a gastight syringe. The reaction mixture was stirred under theirradiation of 36 W blue LEDs (distance app. 2.0-3.0 cm from thebulb) at r.t. for 24 h. The mixture was quenched with brine and ex-tracted with EtOAc (3 ¡Á 10 mL). The organic layers were combinedand concentrated under reduced pressure. The product was purifiedby flash column chromatography on silica gel using PE or a mixture of PEand EtOAc (10:1 v/v) as eluent; yield: 50.1 mg (92%); pale yellow liquid., 5381-20-4

The synthetic route of 5381-20-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Wang, Guang-Zu; Shang, Rui; Fu, Yao; Synthesis; vol. 50; 15; (2018); p. 2908 – 2914;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.360575-29-7,Methyl 4-bromobenzo[b]thiophene-2-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: The solution of compound 2a-2n (1.1 mmol) in water (10 mL)was stirred and then potassium hydroxide pellets (5.4 mmol) wereadded, which was refluxed for 3 h. The aqueous layer was thenacidified to pH 1 with 1M hydrochloric acid solution. The aqueouslayer was extracted with dichloromethane (3 x 15 mL). The combinedorganic layers were dried with sodium sulfate, filtered, andthe solvents were removed under reduced pressure to afford thetitle compound 3a-3n [31,34]. 4.1.2.1. 4-bromobenzo[b]thiophene-2-carboxylic acid (3a). Yield 97%, white solid; m. p. 140-143 C; 1H NMR (600 MHz, DMSO-d6)delta 13.78 (s, 1H), 8.10 (d, J = 8.2 Hz, 1H), 7.96 (s, 1H), 7.71 (d, J = 7.7 Hz,1H), 7.44 (dt, J = 13.1, 2.7 Hz, 1H)., 360575-29-7

As the paragraph descriping shows that 360575-29-7 is playing an increasingly important role.

Reference£º
Article; Cai, Guiping; Yu, Wenying; Song, Dongmei; Zhang, Wenda; Guo, Jianpeng; Zhu, Jiawen; Ren, Yuhao; Kong, Lingyi; European Journal of Medicinal Chemistry; vol. 174; (2019); p. 236 – 251;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.346592-74-3,7-Fluorobenzo[b]thiophene,as a common compound, the synthetic route is as follows.

To a solution of 7-fluoro-benzothiophene (0.22 g, 1.44 mmoles) in anhydrous tetrahydrofuran (10 ml) at -78 C. was added dropwise a solution of n-BuLi in hexane (1.6M, 0.9 ml, 1.44 mmoles). The reaction mixture was stirred at -78 C. for one hour, and then a solution of 3-formyl-3-(tetrahydro-pyran-4-ylmethyl)-pyrrolidine-1-carboxylic acid tert-butyl ester (0.3 g, 1.01 mmoles) in anhydrous tetrahydrofuran (5 ml) was then added. The reaction mixture was stirred at -78 C. for 3 hours, quenched with saturated aqueous ammonium chloride, and partitioned between ethyl acetate and saturated aqueous ammonium chloride solution. The organic phase was washed with brine, dried over anhydrous sodium sulfate, filtered, and concentrated under reduced pressure. The residue was purified by silica gel chromatography (10 to 45% ethyl acetate in hexane) to yield 3-[(7-Fluoro-benzo[b]thiophen-2-yl)-hydroxy-methyl]-3-(tetrahydro-pyran-4-ylmethyl)-pyrrolidine-1-carboxylic acid tert-butyl ester as a colorless semisolid (0.138 g, 30%). MS=450 [M+H]+., 346592-74-3

The synthetic route of 346592-74-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Roche Palo Alto LLC; US2008/146607; (2008); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4923-87-9,5-Bromobenzothiophene,as a common compound, the synthetic route is as follows.

In a four-necked 300 mL round bottomed flask, 5-bromobenzo[b]thiophene (10.8 g, 50.7 mmol) was dissolved in anhydrous THF (120 mL). The reaction solution was cooled at -78 C. A 1.08M lithium diisopropylamide/hexane solution (56.0 mL, 60.5 mmol, 1.2 eq.) was added thereto, and the mixture solution was allowed to warm to 0 C. and stirred for an hour. After the reaction solution was cooled to -78 C. again, 1-iodo octane (18.0 mL, 99.7 mmol, 2.0 eq.) was added. Then, the mixture was allowed to warm to room temperature, and stirred at room temperature for a day. After completion of the reaction, water and ethyl acetate were added. An organic phase was extracted with ethyl acetate, and dried over magnesium sulfate. The resulting crude product was purified by column chromatography, whereby intermediate B1 was obtained (16.5 g, yield 100%)., 4923-87-9

The synthetic route of 4923-87-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; IDEMITSU KOSAN CO., LTD.; US2012/273768; (2012); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem

1423-61-6, 7-Bromobenzo[b]thiophene is a benzothiophene compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step A: In a sealed tube, a solution of 7-bromobenzothiophene (330 mg, 1.55 mmol), 4-tributylstannanyl-isoquinoline (648 mg, 1.55 mmol) and triphenyl phosphine(41 mg, 0.155 mmol) in DMF (3 mL) was degassed by freeze/thaw. Triethylamine (108 muL, 0.775 mmol), palladium (II) acetate (17 mg, 0.078 mmol), and cuprous iodide (59 mg, 0.31 mmol) were added and the reaction mixture was heated to 100 C. for 3 days. The crude product was obtained via aqueous work up using CH2Cl2 as extracting solvent., 1423-61-6

The synthetic route of 1423-61-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Molino, Bruce F.; Liu, Shuang; Guzzo, Peter R.; Beck, James P.; US2006/52378; (2006); A1;,
Benzothiophene – Wikipedia
Benzothiophene | C8H6S – PubChem